• 
  

  3015mAh | 22.1A CDR | 31.5A @ 80^oC cut-off

  
  
• 
  

  Wattage output up 5% to 63W; Amperage up 6.8% to 22.1A CDR; Capacity up 7.4% @ >15A loads

  
  
• 
  

  Designed to feed power-hungry devices without having to swap batteries every other minute

  
  
• 
  

  Chemistry enhanced by QSP (quad stripping process), which is proven to deliver greater voltage-sag resistance

  
  
• 
  

  Exceeds all previous designs and chemistry results with greater amperage and capacity

  
  
• 
  

  A multitude of processes conducted to achieve documented specs

  
  
• 
  

  Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

  
  
• 
  

  Updated Poly Seal: Enhances security of seal & proper operation

  • Anti-Counterfeit ‘Ohm’ embossed top to stop knock-offs/clones

    
    
  • 
    

    NEW Mn bonding process that achieves greater purity: Cycle Life is increased to over 70% nominal average of original capacity

    
    
  • NEW QSP NiCo Meld over 10kHz: process increases charging rate to 4.43A from previous 4.25A
    

• 
  

  2547mAh | 25.3A CDR | 35.8A @ 80^oC cut-off

  
  
• 
  

  Can be charged at a tested/proven 3.82A rating: Yes, 3.82, as in THREE POINT EIGHT TWO. It is possible, tested, proven, and approved**

  
  
• 
  

  Phenomenal amperage delivery to drive power demanding devices

  
  
• 
  

  Purest form of Li-NMC (Nickel [Ni], Manganese [Mn], Cobalt [Co]) used to date

  
  
• 
  

  Exceeds all previous designs and chemistry results with greater amperage and capacity

  
  
• 
  

  EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential

  
  
• 
  

  Updated Poly Seal: Enhances security of seal & proper operation

  
  
• 
  

  Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

IMPORTANT:

Fully charge before first use. 
Never short (connect positive and negative size) battery.
Keep them always in battery case, or any other insulating material.
Never keep this battery together with metal objects (short circuit can happen if you do). 
Never carry bare cell in your pocket with keys, change or any other metal objects. 

 The Sherlock² 20700

will excel very much like its counterparts do, but with increased tolerance to amp loads, voltage sustainability under load, and increased cell life with the inherent cooler operation of new chemistry. For consumers that use devices that require extremely heavy amperage, but need a battery that will support those loads without faulting, we introduce to the Sherlock² 20700 cell.

Capacity: 3116mAh
Max Charge Rate: 4.67A
Continuous Discharge Rate: 30.7A
Pulse | Peak: 47.1A 
Cycle Life Retention: 500 Cycles (70%), 1000 (60%)
Chemistry Type: Li-CoO₂C