HOHM TECH 18650 BATTERIES

$15.00

HOHM TECH 18650 BATTERIES

$15.00

Description

HOHM LIFE4 

The ‘GO’ All Day Battery


  • 3015mAh | 22.1A CDR | 31.5A @ 80oC cut-off



  • Wattage output up 5% to 63W; Amperage up 6.8% to 22.1A CDR; Capacity up 7.4% @ >15A loads



  • Designed to feed power-hungry devices without having to swap batteries every other minute



  • Chemistry enhanced by QSP (quad stripping process), which is proven to deliver greater voltage-sag resistance



  • Exceeds all previous designs and chemistry results with greater amperage and capacity



  • A multitude of processes conducted to achieve documented specs



  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)



  • Updated Poly Seal: Enhances security of seal & proper operation

    • Anti-Counterfeit ‘Ohm’ embossed top to stop knock-offs/clones



    • NEW Mn bonding process that achieves greater purity: Cycle Life is increased to over 70% nominal average of original capacity


    • NEW QSP NiCo Meld over 10kHz: process increases charging rate to 4.43A from previous 4.25A


 

HOHM WORK2 

Power Demanding Devices?  Bring’em On!


  • 2547mAh | 25.3A CDR | 35.8A @ 80oC cut-off



  • Can be charged at a tested/proven 3.82A rating: Yes, 3.82, as in THREE POINT EIGHT TWO. It is possible, tested, proven, and approved**



  • Phenomenal amperage delivery to drive power demanding devices



  • Purest form of Li-NMC (Nickel [Ni], Manganese [Mn], Cobalt [Co]) used to date



  • Exceeds all previous designs and chemistry results with greater amperage and capacity



  • EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential



  • Updated Poly Seal: Enhances security of seal & proper operation



  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

 

 

HOHM STRETCH 

The Do-It-All-Day Battery


  • 2856mAh | 22.1A CDR | 31.6A @ 80oC cut-off



  • Can be charged at a tested/proven 4.28A rating: Yes, 4.28, as in FOUR POINT TWO EIGHT. It is possible, tested, proven, and approved**



  • NEW NiCo Meld over 10kHz: process increases charging rate to 4.28A (1.5C) compared to standard 0.5C – 1C rates of Li-NMC formulation



  • Utilizing industry first QSP Li-NMC (4x raw compound wash)



  • Exceeds all previous designs and chemistry results with greater amperage and capacity



  • EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential



  • Purpose built to take on both high amperage and high capacity tasks simultaneously. Now utilizing proprietary structure, top cap, and a QSP chemistry in the Li-NMC family. More amps ~ cooler temps ~ even safer.



  • Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)

     

    • Ahead of schedule chem bonding to  Li-Mn specifications



    • Phenomenal amperage delivery to drive power demanding devices



    • NEW HT 5-brace embossed top to alleviate impostures from distributing fakes in the industry

  • Many proprietary processes conducted to achieve documented specs

     

     

IMPORTANT:

Fully charge before first use. 
Never short (connect positive and negative size) battery.
Keep them always in battery case, or any other insulating material.
Never keep this battery together with metal objects (short circuit can happen if you do). 
Never carry bare cell in your pocket with keys, change or any other metal objects.